facebook
Abdelali
member icon
Trusted teacher
favorite buttonAdd to Wish List
favorite buttonAdd to Wish List
member icon
Trusted teacher
from43.55CAD/ h

Electricity / Electronics Course: Electric Circuits & Systems

Translated by Google. Click to view original.
Hello, I am an engineer and doctor in electrical engineering and professor of higher education in engineering sciences, experienced in the field of electrical engineering, I offer for graduate students support courses and training in the subjects engineering sciences, in particular in electrical circuits and electricity. My methodology is based on the acquisition of knowledge and course concepts in a very simple way and also on practice using the most widely used software on the market.

The "electrical circuits" course is an essential element of the "engineering sciences" module, or industrial engineering sciences, which brings together scientific disciplines related to the engineering profession, particularly in the field of electrical engineering. .

It deals with the basics of electricity: from the notion of a circuit, to the various existing electrical components, to the resolution of problems and exercises using general theorems.

At the end of this course, the student must be able to:
Analyze in continuous mode and in sinusoidal mode the electrical circuits based on passive components;
Use the theoretical knowledge necessary for solving electrical problems;
Use the theoretical knowledge necessary for the proper conduct of practical work;
Carry out and analyze electrical circuits on design and simulation software used by engineers;

I also give courses and training in:

Electrical and electronic circuits
Automatic
Industrial regulation
Signal processing
C Programming, Assembler, PIC, Arduino
Matlab
LabVIEW
PIC microcontroller
Microprocessor

Location

Online via webcam
At student's location: Around Rabat, Morocco

|
Use ctrl + wheel to zoom!
+

General info

Age:
Children (7-12 years old)
Teenagers (13-17 years old)
Adults (18-64 years old)
Seniors (65+ years old)
Student level:
Beginner
Intermediate
Advanced
Duration:
60 minutes
The class is taught in:French, English, Arabic

About Me

Translated by Google. Click to view original.
Hello, I am an engineer and doctor in electrical engineering and professor of higher education in engineering sciences, experienced in the field of electrical engineering, I offer for graduate students support courses and training in the subjects engineering sciences (Electronics, automation, industrial regulation, signal processing, automation, microcontroller programming, Matlab / Simulink, LabVIEW).

My methodology is based on the acquisition of knowledge and course concepts in a very simple way and also on practice using the most widely used software on the market.

The courses and training I give are:

Electrical and electronic circuits
Automatic
Industrial regulation
Signal processing
C / c ++ programming, Assembler, PIC, Arduino
Matlab
LabVIEW
PIC microcontroller
Microprocessor

Education

Translated by Google. Click to view original.
Doctor of Engineering Sciences
Engineer in electrical engineering and industrial computing
Professional bachelor's degree in electrical engineering and industrial computer science
University degree in technologies in electrical engineering and industrial computer science

Experience / Qualifications

Translated by Google. Click to view original.
5 years of experience in higher education in an engineering school
Teaching of subjects related to electrical engineering

Reviews (2)

Very satisfied with the course and has a perfect command of his field, a big thank you
Translated by Google. Click to view original.
Very good knowledge of LabView and good level of explanations too
Translated by Google. Click to view original.
Hello, I am an engineer and a doctor of electrical engineering. I have a very rich experience as a teacher of higher education in engineering sciences and electrical engineering, plus experience as an EE architecture consultant in the automotive sector. I offer support courses and training in engineering science subjects for graduate students, particularly in Matlab Simulink programming. My methodology is based on the acquisition of knowledge and course concepts in a very simple way and also on practice using the most widely used software on the market. Matlab is both software and a scientific programming language developed by the American company MathWorks which allows various numerical calculation operations to be carried out. For example, manipulating algorithms, displaying data curves or even generating matrices. It is used in everything that is programming, signals and systems, signal processing... It contains another part of graphical programming called Simulink, dedicated to the programming and modeling of dynamic systems (Widely used in the discipline of automatic and industrial regulation). I also give courses and training in: Electrical and electronic circuits Automatic Industrial regulation Signal processing C Programming, Assembler, PIC, Arduino LabVIEW PIC microcontroller Microprocessor
Hello, I am an engineer and a doctor of electrical engineering. I have a very rich experience as a teacher of higher education in engineering sciences and electrical engineering, plus experience as an EE architecture consultant in the automotive sector. I propose for the students of the higher cycle a supervision and an accompaniment until the realization of their projects or mini projects in electronics, signal processing, regulation and enslavement... using languages and software such as: Matlab / Simulink, Python, LabVIEW, ISIS Proteus, Arduino... I also give courses and training in: Electrical and electronic circuits Automatic Industrial regulation Signal processing C Programming, Assembler, PIC, Arduino PIC microcontroller Microprocessor
Hello, I am an engineer and a doctor of electrical engineering. I have a very rich experience as a teacher of higher education in engineering sciences and electrical engineering, plus experience as an EE architecture consultant in the automotive sector. For graduate students, I offer support courses and training in engineering sciences, particularly in automation and industrial regulation. My methodology is based on the acquisition of knowledge and course concepts in a very simple way and also on practice using the most widely used software on the market. Automation is the discipline which, in general, deals with the control of systems. It therefore takes on a very important character in the industrial field to which it provides both solutions, study methods and systematic analysis approaches. It is a scientific discipline that studies dynamic systems, signals and information, for the purpose of driving or making decisions. This course is made up of 6 chapters divided as follows: Chapter 1: Introduction to automation & servo systems Chapter 2: Mathematical modeling of SLCIs Chapter 3: Time & frequency analysis of SLCIs Chapter 4: Command of SLCIs & algebra of block diagrams Chapter 5: Stability & performance of SLCIs Chapter 6: Correction and regulation of servo systems I also give courses and training in: Electrical and electronic circuits Automatic Industrial regulation Signal processing C / c ++ programming, Assembler, PIC, Arduino Matlab LabVIEW PIC microcontroller Microprocessor

Ask a question

Send a message explaining your needs and Abdelali will reply soon:
The more detail, the better.
Ex. "Hi, when are you available to meet for a lesson?"

Availability of a typical week

(GMT -05:00) Chicago
MonTueWedThuFriSatSun
0
  
  
  
  
  
  
  
1
  
  
  
  
  
  
  
2
  
  
  
  
  
  
  
3
  
  
  
  
  
  Saturday at 3:00
  Sunday at 3:00
4
  
  
  
  
  
  Saturday at 4:00
  Sunday at 4:00
5
  
  
  
  
  
  Saturday at 5:00
  Sunday at 5:00
6
  
  
  
  
  
  Saturday at 6:00
  Sunday at 6:00
7
  
  
  
  
  
  Saturday at 7:00
  Sunday at 7:00
8
  
  
  
  
  
  Saturday at 8:00
  Sunday at 8:00
9
  
  
  
  
  
  Saturday at 9:00
  Sunday at 9:00
10
  
  
  
  
  
  Saturday at 10:00
  Sunday at 10:00
11
  
  
  
  
  
  Saturday at 11:00
  Sunday at 11:00
12
  
  
  
  
  
  Saturday at 12:00
  Sunday at 12:00
13
  Monday at 13:00
  Tuesday at 13:00
  Wednesday at 13:00
  Thursday at 13:00
  Friday at 13:00
  Saturday at 13:00
  Sunday at 13:00
14
  Monday at 14:00
  Tuesday at 14:00
  Wednesday at 14:00
  Thursday at 14:00
  Friday at 14:00
  Saturday at 14:00
  Sunday at 14:00
15
  Monday at 15:00
  Tuesday at 15:00
  Wednesday at 15:00
  Thursday at 15:00
  Friday at 15:00
  Saturday at 15:00
  Sunday at 15:00
16
  Monday at 16:00
  Tuesday at 16:00
  Wednesday at 16:00
  Thursday at 16:00
  Friday at 16:00
  Saturday at 16:00
  Sunday at 16:00
17
  Monday at 17:00
  Tuesday at 17:00
  Wednesday at 17:00
  Thursday at 17:00
  Friday at 17:00
  Saturday at 17:00
  Sunday at 17:00
18
  Monday at 18:00
  Tuesday at 18:00
  Wednesday at 18:00
  Thursday at 18:00
  Friday at 18:00
  Saturday at 18:00
  Sunday at 18:00
19
  
  
  
  
  
  
  
20
  
  
  
  
  
  
  
21
  
  
  
  
  
  
  
22
  
  
  
  
  
  
  
23
  
  
  
  
  
  
  
from C$43.55Online via webcam
from C$52.08At student's home

Good-fit Instructor Guarantee


If you are not satisfied after your first lesson, Apprentus will find you another instructor or will refund your first lesson.

Online reputation

  • Instructor since September 2021
  • Phone number verified
  • Google connected
  • Linkedin connected

Availability of a typical week

(GMT -05:00) Chicago
MonTueWedThuFriSatSun
0
  
  
  
  
  
  
  
1
  
  
  
  
  
  
  
2
  
  
  
  
  
  
  
3
  
  
  
  
  
  Saturday at 3:00
  Sunday at 3:00
4
  
  
  
  
  
  Saturday at 4:00
  Sunday at 4:00
5
  
  
  
  
  
  Saturday at 5:00
  Sunday at 5:00
6
  
  
  
  
  
  Saturday at 6:00
  Sunday at 6:00
7
  
  
  
  
  
  Saturday at 7:00
  Sunday at 7:00
8
  
  
  
  
  
  Saturday at 8:00
  Sunday at 8:00
9
  
  
  
  
  
  Saturday at 9:00
  Sunday at 9:00
10
  
  
  
  
  
  Saturday at 10:00
  Sunday at 10:00
11
  
  
  
  
  
  Saturday at 11:00
  Sunday at 11:00
12
  
  
  
  
  
  Saturday at 12:00
  Sunday at 12:00
13
  Monday at 13:00
  Tuesday at 13:00
  Wednesday at 13:00
  Thursday at 13:00
  Friday at 13:00
  Saturday at 13:00
  Sunday at 13:00
14
  Monday at 14:00
  Tuesday at 14:00
  Wednesday at 14:00
  Thursday at 14:00
  Friday at 14:00
  Saturday at 14:00
  Sunday at 14:00
15
  Monday at 15:00
  Tuesday at 15:00
  Wednesday at 15:00
  Thursday at 15:00
  Friday at 15:00
  Saturday at 15:00
  Sunday at 15:00
16
  Monday at 16:00
  Tuesday at 16:00
  Wednesday at 16:00
  Thursday at 16:00
  Friday at 16:00
  Saturday at 16:00
  Sunday at 16:00
17
  Monday at 17:00
  Tuesday at 17:00
  Wednesday at 17:00
  Thursday at 17:00
  Friday at 17:00
  Saturday at 17:00
  Sunday at 17:00
18
  Monday at 18:00
  Tuesday at 18:00
  Wednesday at 18:00
  Thursday at 18:00
  Friday at 18:00
  Saturday at 18:00
  Sunday at 18:00
19
  
  
  
  
  
  
  
20
  
  
  
  
  
  
  
21
  
  
  
  
  
  
  
22
  
  
  
  
  
  
  
23
  
  
  
  
  
  
  
from C$43.55Online via webcam
from C$52.08At student's home

Good-fit Instructor Guarantee


If you are not satisfied after your first lesson, Apprentus will find you another instructor or will refund your first lesson.

Share


Arianit
Electrical Engineering I and II (Electrical Physics, Basics and Introduction, Electronics)
Electrical engineering forms the backbone of today's technology. From the distribution of electricity worldwide to the implementation of microcircuits, electrical engineering describes and provides the fundamentals of all principles pertaining to electronics, telecommunications, power systems, renewable energy, machines and mechatronics, etc. Having graduated as an Electrical Engineer I am offering Electrical Engineering I and II tutorials for beginner students at the University of Applied Sciences Upper Austria. I have experience in elaborating and describing the following thematics which are often problematic for students who seek a degree in Electronics Engineering, Computer Engineering, Telecommunication Engineering, and Electrical Engineering: •Electrical Engineering Basics •Conductor, Isolator, and Semiconductor Physics •AC Passive components: Inductors, Capacitors and Resistors •DC Circuit Analysis (Thevenin, Kirchhoff and Helmholtz approaches) •Three-phase systems •Diodes and the PN Junction •Transistor Physics: BJT/IGBT/MOSFET •Operational Amplifiers •Electronic Circuitry (Buffers, Signal Amplifiers, etc) •Transformer and Electromagnetics Basics

Ossama
Electronique, Electrotechnique, Automatique et Informatique Industrielle
Docteur en Génie Électrique et Professeur Agrégé en Génie Électrique, je propose un enseignement de qualité pour les BTS, CPGE, Université et Lycée Technique dans les disciplines suivantes : 1. Électrotechnique Avec une expertise approfondie dans les systèmes électriques, je suis en mesure d’enseigner tous les aspects de l’électrotechnique, incluant les machines électriques, la conversion d’énergie et les réseaux électriques. Mon approche pédagogique met l’accent sur la compréhension théorique et les applications pratiques. 2. Électronique Je maîtrise l’enseignement de l’électronique analogique et numérique, couvrant les composants, les circuits intégrés et les systèmes embarqués. Je peux transmettre des connaissances solides pour former les étudiants aux technologies actuelles et émergentes. 3. Automatique Je propose des cours complets en commande des systèmes dynamiques, qu’il s’agisse de régulations classiques (PID) ou de commandes avancées (systèmes non linéaires, temps réel). Mes enseignements intègrent des applications pratiques adaptées aux besoins industriels. 4. Informatique Industrielle et Automatisme Fort d’une expérience dans la programmation et l’automatisation industrielle, je peux enseigner des sujets tels que les automates programmables, les systèmes embarqués, les protocoles de communication industrielle, et les IHM. Mon objectif est de rendre les étudiants aptes à concevoir et optimiser des systèmes automatisés complexes.

أحمد.
Unterstützung Nachhilfe MATLAB Simulink embedded Programmierung und Microcontroller
Hello everyone and have a nice day, As a teacher, teacher, student, teacher, professional teacher, and professional student/coaching/unterstützung in MATLAB/Simulink/embedded programme/automatic code generation...etc., you can also contact him. Use this device for your Master Elektrotechnik-Ingenieur with a new academic design and installation tool in the basic model and use the Matlab/Simulink-Model for embedded System and Regelung on the E-Motoren with a fan and pass it. and Anforderungen. For more information, please contact us. Unterstützung professionelle in Matlab, Simulink, C, Microcontroller and embedded Programmierung an. There is a lot of expertise in this article, too: - Matlab, Simulink, - S-Functions, Simulink Modelle, Model Basierte Programmierung and Code Generation, - Electrical drives and E-Motoren, - STM32 Microcontroller, - Rapid Prototyping mittels dSPACE HiL-Systeme and Echtzeit-Systeme, - Power electronics / Leistungselektronik, - Betreuung and Unterstützung während verschiedenenenenenen der projecterbeiten, - ... There is a lot of contact with you. Very nice greetings

Matías
Engineering, electronics, programming, robotics and various projects with ARDUINO and ESP32 and RaspberryPi boards
Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics. Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects. Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies. Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life. Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life. Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently. Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Youssef
Analog and digital electronics, VHDL, FPGA, programming
doctoral student in engineering sciences provides support courses in analog and digital electronics at any DEUG level and engineering schools. having scientific and technical knowledge, three years of experience in the field of teaching, pedagogy and a sense of listening and analysis, I am able to help pupils and students and train them in the chapters of which they are having difficulty. for more info please contact me

Ghous
Fundamentals of Electrical & Electronics Engineering
Electrical engineering is the foundation of modern technology, powering everything from household appliances to industrial automation. This class is designed to introduce beginners to the core concepts of electrical engineering, making complex topics easy to understand. You will learn about: Basic electrical concepts: Voltage, current, resistance, and power Circuit analysis techniques: Ohm’s Law, Kirchhoff’s Laws, and network theorems Introduction to electronic components: Resistors, capacitors, diodes, and transistors etc Hands-on projects using breadboards and simulation software By the end of this course, students will have a strong understanding of electrical fundamentals and be able to apply them in real-world applications, including Arduino and Raspberry Pi projects.

Marko
Physics for all levels from Elementary school to University
✅ Experienced teacher offering private online physics lessons for all levels. ✅ Fully dedicated and focused on student progress. ✅ Very patient, systematic, and organized. I teach a wide range of topics in physics, including but not limited to: 5- Physical quantities and units - Kinematics (types of motion, kinematics of point particles and rigid bodies) - Dynamics (frictional and inertial forces, Newton's laws) - Laws of conservation (energy, momentum) - Theory of collision processes - Inertial and non-inertial reference frames - Potential and kinetic energy - Gravitation and gravity fields - Oscillatory and wave motions - Harmonic oscillator - Doppler effect - Standing waves - Sound waves and physical characteristics of sound - Surface tension and capillary phenomena - Fluid mechanics - Temperature and heat - Calorimetry - Phase transitions - Principles of thermodynamics - Electrostatics - Electromagnetism - Kirchhoff's laws - Electronic circuits - Dielectrics - Optics ... and much more. If there are specific topics you would like to focus on or if you have any questions, feel free to let me know. I am here to help you deepen your understanding of physics.

Lionel
Understanding electricity through mathematical concepts and different diagrams
- Understand the concepts of direct and alternating electricity - Master mathematical concepts through different calculations, symbols and units - Understand the concepts of wiring switches and residential installations

Wissem
Electricity, Robotics and Smart Technologies: From Basics to Innovation
Electricity, Electronics, and Arduino Programming Course, designed to teach you everything you need to know to succeed in the world of robotics and smart technologies! - Start with the basics of electricity and electronics: circuits, components, and simple concepts. - Learn Arduino programming: from writing your first programs to creating advanced robotic systems. - Work on hands-on projects to build and control your own interactive robots. - Explore mobile robotics: control motors, servos, displays, and more. - Learn how to use Bluetooth, RFID, and other connectivity tools for innovative projects. - Discover how to use all types of sensors for smart home applications and home automation (domotics). - Get guidance on managing projects: from developing your idea to achieving the final result. This course is perfect for beginners and anyone passionate about technology, offering a clear and practical path to master robotics, mobile systems, and smart home technologies.

Hossam
Teaching and establishing materials for the Department of Electronics and Communications Engineering for students
More than 10 years of experience teaching inside the Emirates for students of Colleges of Technology, Abu Dhabi University, Baynouna Institute and Emirates University. In addition to the work of projects for students and solutions for reports. The possibility of detailed explanation in an easy and simple way. Items that can be explained: Electrical and electronic circuits 1 and 2 - Digital circuits - Mathematics such as 1, 2 and 3 - Physics - Measurements - Machines - Engineering economics - Matlab - Communication - control - DSP - signals & systems - PLC All subjects of electrical engineering department Electronics I,II, Advanced Electronics, . Electrical and Electronics circuits 1 and 2 - Digital circuits -Digital logic- Mathematics with all its sections - Physics - Measurements -Instrumentation- Matlab - Analog and Digital Communications - DSP (Digital signal Processing)- signals and systems -Logic design- Control - economic Engineering - networks- PLC - micro. All electrical engineering subjects related

Yassine
Introduction to Robotics, Electronics and Programming
Discover the world of robotics, electronics, and programming with a course designed for technology and innovation enthusiasts. Whether you are a beginner or already have some basics, this course will guide you through the fundamentals, with a hands-on approach to designing your own projects. You will learn how to use electronic components, program microcontrollers, and assemble robots to perform autonomous tasks.

Nassim
Basic electronics course starting from zero
Detailed explanation of basic electronics courses starting from basic elements to the most complicated structures, solid course with detailed explanation All electronic components Basic logic circuits integrated circuits

François
Electricity, electronics, automatic course Secondary level up to master
Civil engineer, with extensive experience in individual training, gives: >Maths, physics, chemistry, statistics, algebra, geometry, analysis >Electricity, automatic, electronic For secondary level up to master. I illustrate the theory on the basis of concrete examples thanks to my experience in the business environment.

Ahmed
Basics of electronics engineering, Arduino programming, and smart home circuits
Basics of electronics engineering, Arduino programming, and smart home circuits Start learning from the basics of electronics and various electronic components And the electrical connections required to design and program smart home and Internet of Things circuits What is Arduino and what language is required to program it? How to design programs to control the home through a mobile phone Training on real Arduino circuits and also on simulation programs

Sirine
Arabic lessons, Robotic lessons, Arduino Class,Electronics devices
As an electronics engineering student with hands-on experience in robotics and a native speaker of Arabic, I’m excited to offer lessons that connect practical knowledge with a passion for learning. My goal is to inspire curiosity, build confidence, and provide engaging insights into both robotics and Arabic. Whether you’re a beginner exploring these fields or someone looking to deepen your understanding, I’m here to guide you step-by-step on your learning journey.