Architecture, Art, Design Basic - Intermediate classes

Prestressed concrete is a type of concrete in which certain stresses are applied to the concrete before it is subjected to any load or pressure during its use in construction. This is usually done by tensioning steel wires or rods into the concrete using special devices, and then the concrete is held in a prestressed position. Then, when loads are applied to the concrete during its use, these initial stresses enhance its ability to carry loads better. Advantages: Increased endurance: Helps to withstand heavy loads and high pressures. Reduce cracks: It helps reduce cracks that may appear as a result of heavy loads. Use less material: It can help reduce the amount of concrete and steel required compared to regular concrete. Greater resistance to tension: Prestressed concrete is more resistant to tensile forces than regular concrete. Uses: Bridges: Commonly used in bridges, where concrete must withstand huge loads. Tunnels: Also used in the construction of tunnels and underground passages. High-rise buildings: They may be used in the construction of tall buildings that require high load-bearing capacity.

If you want to lear the profession, which can't be replaced by AI, here I am to help you with that. If you want to master(or learn) electrical engineering with the essential skills needed to effectively utilize Revit and AutoCAD in the design and documentation of electrical systems within building projects, book first lesson with me. Through a combination of theoretical knowledge and practical hands-on exercises, students will learn how to leverage the powerful features of both software tools to create detailed electrical designs, generate accurate drawings, and collaborate seamlessly with other stakeholders in the construction process. Key topics covered include: - Fundamentals of electrical engineering principles and standards. - Introduction to Building Information Modeling (BIM) concepts and workflows. - Utilizing Revit for electrical system design, including lighting, power distribution, and circuiting. - Integrating AutoCAD for detailed drafting, annotation, and documentation of electrical plans. - Performing electrical load analysis and simulation to ensure system efficiency and compliance. - Best practices for organizing, managing, and sharing electrical project data effectively. Whether you are a beginner electrical engineer looking to enhance your skills or a newcomer to Revit and AutoCAD seeking to specialize in electrical design, working with me will provide a solid foundation to excel in the field of building services engineering. For more information, please do not hesitate to text me.

The course of architectural design and executive drawings is a very important scientific subject for university students, as well as graduates of architectural engineering, and also lovers of the field. This course includes learning: The foundations of successful architectural design and how to distribute spaces How to make executive drawings from scratch to professionalism How to create an integrated architectural project and ready-to-implement executive drawings

A talented, experienced, very creative and studious architect offers private lessons and assistance in various tasks related to architecture: *help with designing plans (houses/offices/businesses, shopping centers, clinics, etc.) * training and realization of 3D plans * realization and training in AUTOCAD *design, correction of projects, research of ideas, models, etc.... *Revit: learning and correction... + personalized training according to the needs for students and professionals in minimum time and remotely across the world

Architect and Onthological Coach | Mentorships for entrepreneurs that are starting I plan the classes and exercises depending on the goal of the student. The programs that I teach are: AutoCAD 2D Sketchup Lumion 11 Photoshop Illustrator Dependiendo de la necesidad del alumno podemos aprender puntualmente alguna herramienta de diseño en particular de las siguentes: - AutoCAD 2d - Sketchup - Lumion 11 - Photoshop - Illustrator O mismo doy clases particulares despejando dudas sobre las materias o cursos de diseño que estén realizando.

Interior Design and 3D Visualization with 3ds Max and Corona Renderer is a hands-on course that combines fundamental interior design principles with the technical skills needed to create stunning 3D visualizations. Students will learn space planning, color theory, material selection, and lighting techniques, while mastering tools in 3ds Max for modeling and texturing interior spaces. With Corona Renderer, participants will produce photorealistic renders, bringing designs to life with realistic lighting and materials. By the end of the course, students will have a solid understanding of interior design concepts and be able to create professional-quality 3D visualizations. Through project-based learning, they will complete a portfolio-ready design, gaining industry-relevant skills for interior design or visualization careers. This course is ideal for beginners and professionals looking to enhance their 3D design capabilities.

Civil construction engineer and Doctor of applied sciences from the University of Liège, Lecturer in an engineering school, 65 years old, guides future students of architecture, civil/industrial engineers, construction graduates in understanding and using basic concepts of the calculation of constructions Level: Bac + 1, Bac + 2, Bac + 3, Master 1 and 2 Location/Mode of operation: The course is given only via the internet (I carried out comparative tests to choose the best formula). I use a graphic tablet and everything I write, draw, illustrate is seen in real time on the screen and is provided to you at the end of the course in a PDF. materials: Static mechanics, graphic statics, MRV diagrams (Moment, normal force, shear force), resistance of materials (steel, reinforced concrete, mixed steel-concrete), dimensioning and stability of constructions according to Eurocodes (beams, trusses, slabs, columns, foundations) My objective : Make you understand the matter by developing your physical sense. When? Schedule to be agreed as needed.

I am a highly skilled and experienced Architect with a great experience in Architecture software. Photoshop is an important software, not only for Architects. I'm Strongly knowledgeable about all approaches of Photoshop. More than anything else, a Creative designer with a will for improving learners` productivity levels as well as improving learning experiences. I work with Adobe Photoshop, Autocad, and Revit in addition I can train you to use most graphic design applications.

This class is designed for architecture students, professionals, and design enthusiasts who want to excel in Autodesk Revit. Whether you're a beginner looking to grasp the fundamentals or someone seeking to refine your skills, I provide tailored lessons to suit your goals. You will learn: Revit Basics: Interface, tools, and workflows. 3D Modeling: Creating detailed models for buildings and interiors. Documentation: Producing accurate plans, sections, and elevations. BIM Techniques: Collaborative workflows for efficient project management. Advanced Features: Parametric families, rendering, and schedules. As a qualified architect with extensive Revit experience, I bring real-world insights into my teaching. I have successfully guided both university students and professionals in mastering the program, helping them apply it effectively to academic and industry projects. My interactive lessons focus on practical, hands-on learning to ensure you gain confidence and proficiency in Revit.

Currently in my 3rd year of architecture, I give architecture project lessons but also coach lessons, Sketchup, lumion. I can also give English lessons. At the beginning it is always difficult to master the software and to materialize your ideas well and it is for this reason that I wish to help others.

Learning Architectural design concepts developing analytical skills to overcome design problems making environment a suitable place to live in.Teaching through design problems,exploring various required softwares to help demonstrate the ideas.

I specialise in teaching AutoCAD, Rhino, 3Ds Max, Illustrator, InDesign and Photoshop to students of various levels. My style of teaching is focused on practice. All classes have their goal - to expand the theory and practice to create something complete at the end. I think practice, whether or not you are a beginner or more advanced, is important for learning. Each class is personalized to the needs and interests of the students. I can also realise personal 2D, 3D design projects.

My name is Wael and I have been teaching architecture and general design classes for several years. I graduated from the University of Syria (Architecture) in 2015. I feel comfortable teaching college and university students as well as adults who want to enter the interior design profession. I understand that as creative individuals we all process information differently, therefore my teaching methods will be tailored to your requirements. Class times will also be scheduled around your availability. Regardless of your experience, I believe I can teach you Revit to accomplish what you need. My typical class is usually between 1-2 hours long. I have been teaching this software since 2013. I still use this software during my design projects. I teach students to adults who are looking to get into the interior design and architecture industry. Regions (I am available in almost all regions): West Flanders East Flanders

I specialise in teaching architectural modeling and visulization using 3D Max, Sketch up, Vray, or Twinmotion, Photoshop to students of various levels. I will help you to create photorealistic images and animations or developing your own themes and artistic CG styles We build the course together, according to your desires, your projects and your level. I give you the methodologies during lessons then do little exercises. So that you are faced with problems that I will clear up. This process will make it possible to become autonomous on the software. I am passionate about this job and I love to pass on all my skills and interact with the world around me with all patience and motivation. I will be delighted to work with you! About me: I am Abdelmonem an Architect, 3D-Artist and Computational Design specialist. I graduated with a Master of Arts in Architecture in Dessau. I have more than 9 years of experience in the field of Architecture and Interior Design, Parametric Modeling, 2D/3D Architectural drawings, BIM, 3D modeling, visualization, animations, and rendering.

Autocad lessons for architecture students, all the basic tools and design methods, from designing to printing with formats and scales explanation, editing and all the essential tools to complete a design and print it. The courses will be adopted on the students needs