Prestressed concrete is a type of concrete in which certain stresses are applied to the concrete before it is subjected to any load or pressure during its use in construction. This is usually done by tensioning steel wires or rods into the concrete using special devices, and then the concrete is held in a prestressed position. Then, when loads are applied to the concrete during its use, these initial stresses enhance its ability to carry loads better. Advantages: Increased endurance: Helps to withstand heavy loads and high pressures. Reduce cracks: It helps reduce cracks that may appear as a result of heavy loads. Use less material: It can help reduce the amount of concrete and steel required compared to regular concrete. Greater resistance to tension: Prestressed concrete is more resistant to tensile forces than regular concrete. Uses: Bridges: Commonly used in bridges, where concrete must withstand huge loads. Tunnels: Also used in the construction of tunnels and underground passages. High-rise buildings: They may be used in the construction of tall buildings that require high load-bearing capacity.

If you want to lear the profession, which can't be replaced by AI, here I am to help you with that. If you want to master(or learn) electrical engineering with the essential skills needed to effectively utilize Revit and AutoCAD in the design and documentation of electrical systems within building projects, book first lesson with me. Through a combination of theoretical knowledge and practical hands-on exercises, students will learn how to leverage the powerful features of both software tools to create detailed electrical designs, generate accurate drawings, and collaborate seamlessly with other stakeholders in the construction process. Key topics covered include: - Fundamentals of electrical engineering principles and standards. - Introduction to Building Information Modeling (BIM) concepts and workflows. - Utilizing Revit for electrical system design, including lighting, power distribution, and circuiting. - Integrating AutoCAD for detailed drafting, annotation, and documentation of electrical plans. - Performing electrical load analysis and simulation to ensure system efficiency and compliance. - Best practices for organizing, managing, and sharing electrical project data effectively. Whether you are a beginner electrical engineer looking to enhance your skills or a newcomer to Revit and AutoCAD seeking to specialize in electrical design, working with me will provide a solid foundation to excel in the field of building services engineering. For more information, please do not hesitate to text me.

The course of architectural design and executive drawings is a very important scientific subject for university students, as well as graduates of architectural engineering, and also lovers of the field. This course includes learning: The foundations of successful architectural design and how to distribute spaces How to make executive drawings from scratch to professionalism How to create an integrated architectural project and ready-to-implement executive drawings

Tansform your work to a strong conceptual project, where I will also teach you communication skills that allows you to cleverly explain your project to your professors. I'm an architect graduated from the Lebanese University with a specialised Master from Spain, with experience in Lebanon and Europe. I assist students in their architecture studio projects, from developing concepts, master planning, 3D drawings, until submission if needed (remotely or in person). I also teach AutoCAD and Revit (essential and advanced levels). The first step is to have confidence in your work, so I will also help you build your personality as an architect by providing you with 7 years worth of architectural knowledge. Let's start learning!

I am a highly skilled and experienced Architect with a great experience in Architecture software. Photoshop is an important software, not only for Architects. I'm Strongly knowledgeable about all approaches of Photoshop. More than anything else, a Creative designer with a will for improving learners` productivity levels as well as improving learning experiences. I work with Adobe Photoshop, Autocad, and Revit in addition I can train you to use most graphic design applications.

This class is designed for architecture students, professionals, and design enthusiasts who want to excel in Autodesk Revit. Whether you're a beginner looking to grasp the fundamentals or someone seeking to refine your skills, I provide tailored lessons to suit your goals. You will learn: Revit Basics: Interface, tools, and workflows. 3D Modeling: Creating detailed models for buildings and interiors. Documentation: Producing accurate plans, sections, and elevations. BIM Techniques: Collaborative workflows for efficient project management. Advanced Features: Parametric families, rendering, and schedules. As a qualified architect with extensive Revit experience, I bring real-world insights into my teaching. I have successfully guided both university students and professionals in mastering the program, helping them apply it effectively to academic and industry projects. My interactive lessons focus on practical, hands-on learning to ensure you gain confidence and proficiency in Revit.

Currently in my 3rd year of architecture, I give architecture project lessons but also coach lessons, Sketchup, lumion. I can also give English lessons. At the beginning it is always difficult to master the software and to materialize your ideas well and it is for this reason that I wish to help others.

I specialise in teaching AutoCAD, Rhino, 3Ds Max, Illustrator, InDesign and Photoshop to students of various levels. My style of teaching is focused on practice. All classes have their goal - to expand the theory and practice to create something complete at the end. I think practice, whether or not you are a beginner or more advanced, is important for learning. Each class is personalized to the needs and interests of the students. I can also realise personal 2D, 3D design projects.

Learning Architectural design concepts developing analytical skills to overcome design problems making environment a suitable place to live in.Teaching through design problems,exploring various required softwares to help demonstrate the ideas.

I specialize in teaching BIM modeling software like Revit and ArchiCad, Autocad for 2D to students of various levels. We build the course together, according to your desires, your projects, and your level. I give you the methodologies during lessons and then do little exercises. So that you are faced with problems that I will clear up. This process will make it possible to become autonomous on the software. I am passionate about this job and I love to pass on all my skills and interact with the world around me with all patience and motivation. I will be delighted to work with you! I am an Architect, 3D-Artist and Computational Design specialist. I graduated with a Master of Arts in Architecture in Dessau. I have more than 9 years of experience in the field of Architecture and Interior Design, Parametric Modeling, 2D/3D Architectural drawings, BIM, 3D modeling, visualization, animations, and rendering.

Teaching Methodology in Interior Design: -Teaching Techniques and Methods: I use a structured and personalized approach to foster creativity and understanding of key concepts. Lessons include hands-on projects in space design, materials, layouts, and ambiance, with case studies to strengthen analytical and creative skills. Teaching techniques also incorporate software use, such as Homestyler, Revit, SketchUp, AutoCAD, Lumion, and Adobe Suite. -Typical Course Structure: Each class begins with a discussion to assess the student’s expectations. We then delve into the topic of the day, covering theoretical concepts, a practical exercise, and a critical analysis, followed by additional resources for further study. -What Sets Me Apart as an Instructor: My international experience offers a broad perspective on design trends. I emphasize creativity while providing a solid foundation and a supportive, yet rigorous teaching style. -Target Audience: My courses are designed for high school students, early university students in architecture or design, and anyone looking to discover or deepen their understanding of interior design.

My name is Wael and I have been teaching architecture and general design classes for several years. I graduated from the University of Syria (Architecture) in 2015. I feel comfortable teaching college and university students as well as adults who want to enter the interior design profession. I understand that as creative individuals we all process information differently, therefore my teaching methods will be tailored to your requirements. Class times will also be scheduled around your availability. Regardless of your experience, I believe I can teach you Revit to accomplish what you need. My typical class is usually between 1-2 hours long. I have been teaching this software since 2013. I still use this software during my design projects. I teach students to adults who are looking to get into the interior design and architecture industry. Regions (I am available in almost all regions): West Flanders East Flanders

My classes will be mainly conversational. Normally I will recommend consumer material in Spanish such as music, series, movies and books, going deeper and immersing ourselves in a much more general way in the language. We will be able to comment on all these readings, viewings, etc. later in the classrooms and we will also reinforce these comments and talks with some superficial grammar bases. The objective is for them to be dynamic and fun classes, in which the language is used, far from the old methods of executing exercises after theory and a repetitive and boring system.

Manual Technical Drawings: Design and Architecture Floor plans Elevations Sections Perspective Details Renderings Furniture plans Lighting plans Grid methods 1-2-3 point perspectives Orthographic projections Isometric projections Still drawings Mood boards + Creative process check ins Career consultations Mentoring + Arts and Crafts Calligraphy

Adobe Photoshop and illutsrato are essential tools in archtitecure, in spedific the courses conatin: architecural projects presentations, concept diagrams, arrangement and page design for projects of all scales, use of textures for masterplans, diagrams and layout styles for concept presentations, Typographic Layouts: Developing skills in typography to create compelling text layouts and titles that support the visual hierarchy of presentations, making information more readable and engaging,Collage Techniques for Concept Development: Using collage styles to explore and communicate initial concepts and moods. These techniques can help convey abstract ideas, material combinations, or spatial atmospheres. The classes will be adopted to the students specific needs, in one of the three languges mentioned, italian, greek or english.