LEARN ARDUINO, MICROCONTROLLERS, C++ FOR MAKERS IN EASY STEPS

Being an associate professor and Doctor in Mechanical Engineering and Robotics, I give private lessons at the following level: * Kinematic Model Course (direct or inverse) * Dynamic Model Course (direct or reverse) * Static Model Course (direct or inverse) * Course Planning the trajectory * Robot Control Course * Programming course on Matlab or RoboStudio.

In these Engineering Classes, I guide, mentor, and facilitate your growth and intuitive technical understanding. I share my experiences with Aerospace/Aeronautical/Mechanical/Electrical Engineering, helping you develop your skills and techniques to tackle any problem, whilst adapting our lessons to your natural method of learning. Contact me here to introduce yourself and tell me more about the topics that you would like additional support with. This could be, for example, Aero/ Flight Dynamics, Control Systems, Dynamic Structures, Business Data Analysis, or any other topics. Whatever university you are studying at, I am certain that you will leave our sessions fulfilled, inspired, and driven to take on any challenge that may come your way. Contact me now for my availability, so that we can organize your first session as soon as possible. I look forward to meeting you! __________________________________________________________________________________ Previously supported students from top universities such as: UK: - Imperial College London (+ Business School) (ICL) - University College London (UCL) - King's College London (KCL) NL: - Delft University of Technology (TUDelft) - University of Amsterdam - University of Groningen SW - ETH Zurich - Swiss Federal Institute of Technology AU - Queensland University of Technology - University of Queensland - Griffith University __________________________________________________________________________________ A little about myself: My name is Anh; I was born and raised in the U.K. and I have over 8 years of international experience, tutoring Middle School to University Level Maths, Sciences, and Engineering, with 4 years of working experience in the Aerospace and Maritime industry. I have a fun, ambitious, and outgoing personality with a passion for music, cooking, and trying new things. Whilst teaching and mentoring, I am patient and adaptable to the needs of each of my students. I am working as an Engineering Specialist/Consultant, holding: - a degree as a Master of Aeronautical Engineering from Imperial College London, - A*A*A* A-Level Further Maths and Physics, with, - straight A*s in (GCSE) Maths, Physics, Chemistry, Biology, English, Geography. I was also previously mentored and tutored myself and having been through the problems and achievements first-hand, I want to help others do so as well.

I provide online tutoring classes to students from all academic levels from high school to college. I teach Algebra, Calculus, Trigonometry, and Differential Equations. I will apply efficient and fast methods to help you in your classes. Also, the classes can be taught in Spanish or English.

Need help with mechanics, physics or thermodynamics? As a civil engineer, 31, I am happy to help you! Learn at your pace and with many examples to clarify the learning material. I have years of experience in learning simple and complex material. The lessons run as follows. First, we look together for the student's biggest stumbling blocks. These can be related to the subject matter as well as to the study method. From there, I work at the pace of the student and encourage them to ask as many questions as possible. I also give tips and tricks, and improve their working methods where necessary. During the lesson I give many examples to make the subject matter more interesting and we solve exercises together. Once practiced from the lesson, I mastered challenging exercises to also test the deeper understanding of the subject matter. In this way I try to optimally prepare the student for his/her exam test. However, learning should also be enjoyable. That is why I always strive for a bond with the student through a spontaneous and positive approach. I am also very patient. All this to solve and improve the problems. Are you interested? Don't hesitate to receive me! Please come! Tim

..................................... (satisfied or refunded)........ ....... Electrical engineering expert PhD student in electrical engineering and renewable energies engineer in electrical engineering and industrial computing I offer home schooling courses to deal with the difficulties encountered by students during their schooling, These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams. ===Automatic (Servo-control and automatism regulation (discrete, continuous)======== ===Electrical engineering (electrical machines) and power electronics (inverter rectifier)======= ===Continuous and sampled signal processing================= ===VHDL programming, microcontroller and microprocessor (intel, ARM)============ ===High frequency electronics (transistor, diode, AOP, noise)============ ===Propagation of electromagnetic waves and antennas======== ===Analog and digital electronics (filters, flip-flops, sysml,Grafcet,amplifier)===== === Realization of electrical projects ===MATLAB ARDUINO Proteus ISIS === Renewable energies COURSE OBJECTIVES AND PEDAGOGICAL APPROACH Resumption and deepening of fundamental concepts through exercises with course reminders. Put the student in a situation of questioning and research. Respond to individual issues and questions Exercise training in order to achieve real mastery of the content. Learn to build theoretical reasoning from observable facts or hypotheses. Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background) This pedagogical approach is effective since it has often led me to interesting results with my students.

Thermodynamics deals with heat, work, and temperature, and their relation to energy, entropy, and the physical properties of matter and radiation. The behavior of these quantities is governed by the four laws of thermodynamics. The science of thermodynamics is a very sweet and conceptual science. Many concepts that we face in reality are examined in thermodynamics. Laws of thermodynamics, entropy generation and analysis and investigation of various thermodynamic cycles, etc. are things that are taught in class. references : Cengel , Borgnakke.

Teaching All Engineer Courses for Mechanical Engineering Students which will suits also Mechanical Engineering Students, Electrical Engineering Students and Computer Engineering Students. It will include theoretical teaching lessons and practical teaching lessons and also include many software such as Matlab.

Lecturer at the Faculty of Engineering. Experience in teaching since 2004. I took mechanical engineering courses such as statics, Dynamics, Solid Mechanics, and fluid. Mech, Heat Transfer, Thermodynamics, Strength of materials). I contributed and supervised on technical projects.

Solid mechanics is a key area of mechanical engineering which have key ingredient of mathematics and physics. I love to teach and share the knowledge gained over these years on Mathematics, Physics and various courses in mechanical engineering.

Hello, I am a doctor in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer support courses in the subjects of engineering sciences (electronics, automation, electrical engineering, automation, programming). Digital electronics Analog electronic electromagnetism (propagation of high frequency waves) Automatic (continuous, sampled) electrical engineering (transformers, electrical machines, switching power supply) C / c ++ programming, Assembler, ARM, STM32 renewable energy (wind, PV) engineering Sciences RDM Python,VHDL PIC Microprocessor and Microcontroller Signal processing and data acquisition Engineering Sciences These courses allow the student to get up to speed and regain confidence in all scientific subjects, just as they prepare him effectively for the Baccalaureate, the Preparatory Classes or various examinations of the engineering classes. COURSE OBJECTIVES AND PEDAGOGICAL APPROACH Resumption and deepening of fundamental concepts through exercises with course reminders. Put the student in a situation of questioning and research. Respond to individual issues and questions Exercise training in order to achieve real mastery of the content. Learn to build theoretical reasoning from observable facts or hypotheses. Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background) This educational approach is effective since it has often led me to interesting results with my students. Associate professor provides support courses in electrical engineering

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics. Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects. Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies. Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life. Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life. Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently. Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Objectives 1- Verification of Kirchhoff's current and voltage laws. 2- Verification Voltage Dividers 3- Verification of Thevenin's Theorem Kirchhoff's Current Law At any point (junction) in an electric circuit, the sum of currents flowing into that node is equal to the sum of currents flowing out of it. Kirchhoff's Voltage Law In any closed circuit, the summation of voltage sources (EMF) equals the summation of voltage drops Voltage drop is the voltage difference across a resistor's terminals Common DC Circuit Terms: • Circuit – a circuit is a closed loop conducting path in which an electrical current flows. • Path – a single line of connecting elements or sources. • Node – a node is a junction, connection or terminal within a circuit were two or more circuit elements are connected or joined together giving a connection point between two or more branches. A node is indicated by a dot. • Branch – a branch is a single or group of components such as resistors or a source which are connected between two nodes. • Loop – a loop is a simple closed path in a circuit in which no circuit element or node is encountered more than once Voltage Dividers • An electronic circuit that accepts a certain voltage input It produces a fraction of that input voltage as the output • The same current I flows through R1 and R2 Thevenin's Theorem • Thevenin theorem is an analytical method used to change a complex circuit into a simple equivalent circuit consisting of a single resistance in series with a voltage source.

I hold a PhD in Mechanical Engineering and currently, I am working as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology). I have extensive experience in teaching various Mechanical design packages, including LS-DYNA, ANSYS, APDL programming, ABAQUS, MATLAB, SolidWorks, Cura, and Symbolic MATLAB. Some of the finite element modeling and numerical simulations I have worked on include: - Multiscale finite element modeling for fatigue crack propagation in porous materials. - Analysis of multiple-layer sandwich structures' resistance to bird-strike impact [Read paper]. - Investigation of debonding propagation in aluminum and glass/epoxy composite joints under fatigue loading using Fracture Mechanics principles. - Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials. - Study of the effect of material type, stacking sequence, and impact location on pedestrian head injury in collisions. If you have any additional questions before starting the class, please don't hesitate to ask me. I am here to help! :)

Electrical engineering forms the backbone of today's technology. From the distribution of electricity worldwide to the implementation of microcircuits, electrical engineering describes and provides the fundamentals of all principles pertaining to electronics, telecommunications, power systems, renewable energy, machines and mechatronics, etc. Having graduated as an Electrical Engineer I am offering Electrical Engineering I and II tutorials for beginner students at the University of Applied Sciences Upper Austria. I have experience in elaborating and describing the following thematics which are often problematic for students who seek a degree in Electronics Engineering, Computer Engineering, Telecommunication Engineering, and Electrical Engineering: •Electrical Engineering Basics •Conductor, Isolator, and Semiconductor Physics •AC Passive components: Inductors, Capacitors and Resistors •DC Circuit Analysis (Thevenin, Kirchhoff and Helmholtz approaches) •Three-phase systems •Diodes and the PN Junction •Transistor Physics: BJT/IGBT/MOSFET •Operational Amplifiers •Electronic Circuitry (Buffers, Signal Amplifiers, etc) •Transformer and Electromagnetics Basics

Math, Electrical engineering and English tutor for secondary school and university students teaching all the subjects related to math, Electrical engineering and English including assignments and exams preparation. Also helping university students to do their final year project