facebook
Abdelali
Trusted teacher
FavouritesAdd to Wish List
FavouritesAdd to Wish List
Trusted teacher
from29.28USD/ h

Electricity / Electronics Course: Electric Circuits & Systems

Translated by Google. Click to view original.
Hello, I am an engineer and doctor in electrical engineering and professor of higher education in engineering sciences, experienced in the field of electrical engineering, I offer for graduate students support courses and training in the subjects engineering sciences, in particular in electrical circuits and electricity. My methodology is based on the acquisition of knowledge and course concepts in a very simple way and also on practice using the most widely used software on the market.

The "electrical circuits" course is an essential element of the "engineering sciences" module, or industrial engineering sciences, which brings together scientific disciplines related to the engineering profession, particularly in the field of electrical engineering. .

It deals with the basics of electricity: from the notion of a circuit, to the various existing electrical components, to the resolution of problems and exercises using general theorems.

At the end of this course, the student must be able to:
Analyze in continuous mode and in sinusoidal mode the electrical circuits based on passive components;
Use the theoretical knowledge necessary for solving electrical problems;
Use the theoretical knowledge necessary for the proper conduct of practical work;
Carry out and analyze electrical circuits on design and simulation software used by engineers;

I also give courses and training in:

Electrical and electronic circuits
Automatic
Industrial regulation
Signal processing
C Programming, Assembler, PIC, Arduino
Matlab
LabVIEW
PIC microcontroller
Microprocessor

Location

Online via webcam
At student's location: Around Rabat, Morocco

|
Use ⊞+wheel to zoom!
+

General info

Age:
Children (7-12 years old)
Teenagers (13-17 years old)
Adults (18-64 years old)
Seniors (65+ years old)
Student level:
Beginner
Intermediate
Advanced
Duration:
60 minutes
The class is taught in:French, English, Arabic

About Me

Translated by Google. Click to view original.
Hello, I am an engineer and doctor in electrical engineering and professor of higher education in engineering sciences, experienced in the field of electrical engineering, I offer for graduate students support courses and training in the subjects engineering sciences (Electronics, automation, industrial regulation, signal processing, automation, microcontroller programming, Matlab / Simulink, LabVIEW).

My methodology is based on the acquisition of knowledge and course concepts in a very simple way and also on practice using the most widely used software on the market.

The courses and training I give are:

Electrical and electronic circuits
Automatic
Industrial regulation
Signal processing
C / c ++ programming, Assembler, PIC, Arduino
Matlab
LabVIEW
PIC microcontroller
Microprocessor

Education

Translated by Google. Click to view original.
Doctor of Engineering Sciences
Engineer in electrical engineering and industrial computing
Professional bachelor's degree in electrical engineering and industrial computer science
University degree in technologies in electrical engineering and industrial computer science

Experience / Qualifications

Translated by Google. Click to view original.
5 years of experience in higher education in an engineering school
Teaching of subjects related to electrical engineering

Reviews (2)

Very satisfied with the course and has a perfect command of his field, a big thank you
Translated by Google. Click to view original.
Very good knowledge of LabView and good level of explanations too
Translated by Google. Click to view original.
Hello, I am an engineer and a doctor of electrical engineering. I have a very rich experience as a teacher of higher education in engineering sciences and electrical engineering, plus experience as an EE architecture consultant in the automotive sector. I offer support courses and training in engineering science subjects for graduate students, particularly in Matlab Simulink programming. My methodology is based on the acquisition of knowledge and course concepts in a very simple way and also on practice using the most widely used software on the market. Matlab is both software and a scientific programming language developed by the American company MathWorks which allows various numerical calculation operations to be carried out. For example, manipulating algorithms, displaying data curves or even generating matrices. It is used in everything that is programming, signals and systems, signal processing... It contains another part of graphical programming called Simulink, dedicated to the programming and modeling of dynamic systems (Widely used in the discipline of automatic and industrial regulation). I also give courses and training in: Electrical and electronic circuits Automatic Industrial regulation Signal processing C Programming, Assembler, PIC, Arduino LabVIEW PIC microcontroller Microprocessor
Hello, I am an engineer and a doctor of electrical engineering. I have a very rich experience as a teacher of higher education in engineering sciences and electrical engineering, plus experience as an EE architecture consultant in the automotive sector. I propose for the students of the higher cycle a supervision and an accompaniment until the realization of their projects or mini projects in electronics, signal processing, regulation and enslavement... using languages and software such as: Matlab / Simulink, Python, LabVIEW, ISIS Proteus, Arduino... I also give courses and training in: Electrical and electronic circuits Automatic Industrial regulation Signal processing C Programming, Assembler, PIC, Arduino PIC microcontroller Microprocessor
Hello, I am an engineer and a doctor of electrical engineering. I have a very rich experience as a teacher of higher education in engineering sciences and electrical engineering, plus experience as an EE architecture consultant in the automotive sector. For graduate students, I offer support courses and training in engineering sciences, particularly in automation and industrial regulation. My methodology is based on the acquisition of knowledge and course concepts in a very simple way and also on practice using the most widely used software on the market. Automation is the discipline which, in general, deals with the control of systems. It therefore takes on a very important character in the industrial field to which it provides both solutions, study methods and systematic analysis approaches. It is a scientific discipline that studies dynamic systems, signals and information, for the purpose of driving or making decisions. This course is made up of 6 chapters divided as follows: Chapter 1: Introduction to automation & servo systems Chapter 2: Mathematical modeling of SLCIs Chapter 3: Time & frequency analysis of SLCIs Chapter 4: Command of SLCIs & algebra of block diagrams Chapter 5: Stability & performance of SLCIs Chapter 6: Correction and regulation of servo systems I also give courses and training in: Electrical and electronic circuits Automatic Industrial regulation Signal processing C / c ++ programming, Assembler, PIC, Arduino Matlab LabVIEW PIC microcontroller Microprocessor

Ask a question

Send a message explaining your needs and Abdelali will reply soon:
The more detail, the better.
Ex. "Hi, when are you available to meet for a lesson?"

Availability of a typical week

(GMT -05:00) New York
MonTueWedThuFriSatSun
0              
1              
2            Saturday at 2:00  Sunday at 2:00
3            Saturday at 3:00  Sunday at 3:00
4            Saturday at 4:00  Sunday at 4:00
5            Saturday at 5:00  Sunday at 5:00
6            Saturday at 6:00  Sunday at 6:00
7            Saturday at 7:00  Sunday at 7:00
8            Saturday at 8:00  Sunday at 8:00
9            Saturday at 9:00  Sunday at 9:00
10            Saturday at 10:00  Sunday at 10:00
11            Saturday at 11:00  Sunday at 11:00
12  Monday at 12:00  Tuesday at 12:00  Wednesday at 12:00  Thursday at 12:00  Friday at 12:00  Saturday at 12:00  Sunday at 12:00
13  Monday at 13:00  Tuesday at 13:00  Wednesday at 13:00  Thursday at 13:00  Friday at 13:00  Saturday at 13:00  Sunday at 13:00
14  Monday at 14:00  Tuesday at 14:00  Wednesday at 14:00  Thursday at 14:00  Friday at 14:00  Saturday at 14:00  Sunday at 14:00
15  Monday at 15:00  Tuesday at 15:00  Wednesday at 15:00  Thursday at 15:00  Friday at 15:00  Saturday at 15:00  Sunday at 15:00
16  Monday at 16:00  Tuesday at 16:00  Wednesday at 16:00  Thursday at 16:00  Friday at 16:00  Saturday at 16:00  Sunday at 16:00
17  Monday at 17:00  Tuesday at 17:00  Wednesday at 17:00  Thursday at 17:00  Friday at 17:00  Saturday at 17:00  Sunday at 17:00
18              
19              
20              
21              
22              
23              
from $29.28Online via webcam
from $35.01At student's home

Good-fit Instructor Guarantee


If you are not satisfied after your first lesson, Apprentus will find you another instructor or will refund your first lesson.

Online reputation

  • Instructor since September 2021
  • Phone number verified
  • Google connected
  • Linkedin connected

Availability of a typical week

(GMT -05:00) New York
MonTueWedThuFriSatSun
0              
1              
2            Saturday at 2:00  Sunday at 2:00
3            Saturday at 3:00  Sunday at 3:00
4            Saturday at 4:00  Sunday at 4:00
5            Saturday at 5:00  Sunday at 5:00
6            Saturday at 6:00  Sunday at 6:00
7            Saturday at 7:00  Sunday at 7:00
8            Saturday at 8:00  Sunday at 8:00
9            Saturday at 9:00  Sunday at 9:00
10            Saturday at 10:00  Sunday at 10:00
11            Saturday at 11:00  Sunday at 11:00
12  Monday at 12:00  Tuesday at 12:00  Wednesday at 12:00  Thursday at 12:00  Friday at 12:00  Saturday at 12:00  Sunday at 12:00
13  Monday at 13:00  Tuesday at 13:00  Wednesday at 13:00  Thursday at 13:00  Friday at 13:00  Saturday at 13:00  Sunday at 13:00
14  Monday at 14:00  Tuesday at 14:00  Wednesday at 14:00  Thursday at 14:00  Friday at 14:00  Saturday at 14:00  Sunday at 14:00
15  Monday at 15:00  Tuesday at 15:00  Wednesday at 15:00  Thursday at 15:00  Friday at 15:00  Saturday at 15:00  Sunday at 15:00
16  Monday at 16:00  Tuesday at 16:00  Wednesday at 16:00  Thursday at 16:00  Friday at 16:00  Saturday at 16:00  Sunday at 16:00
17  Monday at 17:00  Tuesday at 17:00  Wednesday at 17:00  Thursday at 17:00  Friday at 17:00  Saturday at 17:00  Sunday at 17:00
18              
19              
20              
21              
22              
23              
from $29.28Online via webcam
from $35.01At student's home

Good-fit Instructor Guarantee


If you are not satisfied after your first lesson, Apprentus will find you another instructor or will refund your first lesson.

Share


Matías
Engineering, electronics, programming, robotics and various projects with ARDUINO and ESP32 and RaspberryPi boards
Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics. Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects. Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies. Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life. Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life. Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently. Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Arianit
Electrical Engineering I and II (Electrical Physics, Basics and Introduction, Electronics)
Electrical engineering forms the backbone of today's technology. From the distribution of electricity worldwide to the implementation of microcircuits, electrical engineering describes and provides the fundamentals of all principles pertaining to electronics, telecommunications, power systems, renewable energy, machines and mechatronics, etc. Having graduated as an Electrical Engineer I am offering Electrical Engineering I and II tutorials for beginner students at the University of Applied Sciences Upper Austria. I have experience in elaborating and describing the following thematics which are often problematic for students who seek a degree in Electronics Engineering, Computer Engineering, Telecommunication Engineering, and Electrical Engineering: •Electrical Engineering Basics •Conductor, Isolator, and Semiconductor Physics •AC Passive components: Inductors, Capacitors and Resistors •DC Circuit Analysis (Thevenin, Kirchhoff and Helmholtz approaches) •Three-phase systems •Diodes and the PN Junction •Transistor Physics: BJT/IGBT/MOSFET •Operational Amplifiers •Electronic Circuitry (Buffers, Signal Amplifiers, etc) •Transformer and Electromagnetics Basics

Dr:Mohamed Hany Mahmoud
Electronic circuits basics and DC Electronic circuits analysis
Objectives 1- Verification of Kirchhoff's current and voltage laws. 2- Verification Voltage Dividers 3- Verification of Thevenin's Theorem Kirchhoff's Current Law At any point (junction) in an electric circuit, the sum of currents flowing into that node is equal to the sum of currents flowing out of it. Kirchhoff's Voltage Law In any closed circuit, the summation of voltage sources (EMF) equals the summation of voltage drops Voltage drop is the voltage difference across a resistor's terminals Common DC Circuit Terms: • Circuit – a circuit is a closed loop conducting path in which an electrical current flows. • Path – a single line of connecting elements or sources. • Node – a node is a junction, connection or terminal within a circuit were two or more circuit elements are connected or joined together giving a connection point between two or more branches. A node is indicated by a dot. • Branch – a branch is a single or group of components such as resistors or a source which are connected between two nodes. • Loop – a loop is a simple closed path in a circuit in which no circuit element or node is encountered more than once Voltage Dividers • An electronic circuit that accepts a certain voltage input It produces a fraction of that input voltage as the output • The same current I flows through R1 and R2 Thevenin's Theorem • Thevenin theorem is an analytical method used to change a complex circuit into a simple equivalent circuit consisting of a single resistance in series with a voltage source.

François
Electricity, electronics, automatic course Secondary level up to master
Civil engineer, with extensive experience in individual training, gives: >Maths, physics, chemistry, statistics, algebra, geometry, analysis >Electricity, automatic, electronic For secondary level up to master. I illustrate the theory on the basis of concrete examples thanks to my experience in the business environment.

Marko
Physics for all levels from Elementary school to University
✅ Experienced teacher offering private online physics lessons for all levels. ✅ Fully dedicated and focused on student progress. ✅ Very patient, systematic, and organized. I teach a wide range of topics in physics, including but not limited to: 5- Physical quantities and units - Kinematics (types of motion, kinematics of point particles and rigid bodies) - Dynamics (frictional and inertial forces, Newton's laws) - Laws of conservation (energy, momentum) - Theory of collision processes - Inertial and non-inertial reference frames - Potential and kinetic energy - Gravitation and gravity fields - Oscillatory and wave motions - Harmonic oscillator - Doppler effect - Standing waves - Sound waves and physical characteristics of sound - Surface tension and capillary phenomena - Fluid mechanics - Temperature and heat - Calorimetry - Phase transitions - Principles of thermodynamics - Electrostatics - Electromagnetism - Kirchhoff's laws - Electronic circuits - Dielectrics - Optics ... and much more. If there are specific topics you would like to focus on or if you have any questions, feel free to let me know. I am here to help you deepen your understanding of physics.

José
Computer Programming, Electronics, Informatics, Digital systems
I can teach, tutor and give explanations of computer programming languages, web development of Microsoft or hybrid apps, mobile apps development of Android, electronics, robotics, electric circuits, computer sciences, repair computers and gadgets.

Monther
Electrical and Electronics Engineering, Microcontroller Projects
Teaching electrical and electronic engineering subjects through examples and practical explanations Examples of subjects that I can teach in Arabic and English: Microcontroller - Arduino - Embedded System - Electrical Machine - Power Electronics - Digital System Design - Digital Circuit - Programming in C And some other core subjects for electrical and electronic engineering major I am able to teach the Electrical and Electronics Engineering Subject with practical examples, some courses that I can teach: Microcontroller - Embedded System - Electrical Machine - Power Electronics - Digital System Design - Digital Circuit - Programming in C.

Hossam
Teaching and establishing materials for the Department of Electronics and Communications Engineering for students
More than 10 years of experience teaching inside the Emirates for students of Colleges of Technology, Abu Dhabi University, Baynouna Institute and Emirates University. In addition to the work of projects for students and solutions for reports. The possibility of detailed explanation in an easy and simple way. Items that can be explained: Electrical and electronic circuits 1 and 2 - Digital circuits - Mathematics such as 1, 2 and 3 - Physics - Measurements - Machines - Engineering economics - Matlab - Communication - control - DSP - signals & systems - PLC All subjects of electrical engineering department Electronics I,II, Advanced Electronics, . Electrical and Electronics circuits 1 and 2 - Digital circuits -Digital logic- Mathematics with all its sections - Physics - Measurements -Instrumentation- Matlab - Analog and Digital Communications - DSP (Digital signal Processing)- signals and systems -Logic design- Control - economic Engineering - networks- PLC - micro. All electrical engineering subjects related

Abdullah
Physics(mechanics,Igcse syllabus and International Advanced Level,Edexcel A levels)
A distinguished private tutor with extensive experience in teaching mathematics, physics, chemistry, and science subjects according to the British and American curricula. This teacher has exceptional teaching skills and an advanced educational vision that helps students achieve their maximum potential and excel in scientific subjects. With his strong background in scientific subjects and his constant knowledge of the latest developments in the field of education, he is able to simplify difficult and complex concepts and explain them clearly to students. His interactive teaching method is enhanced and maximum use of class time is encouraged, as he encourages students to ask questions and actively participate in lessons. A symbol of commitment and professionalism, this teacher takes the time to assess the needs of each individual student and develop a customized learning plan to help them enhance their skills and overcome challenges they may face. With a deep understanding of different learning styles, he guides students in ways that suit their thinking style and needs. This teacher encourages students to develop their scientific and analytical thinking skills by solving practical exercises and applied problems. It also promotes independence and excellence by providing additional learning resources and directing students to trusted sources to continue their learning outside of class. With a strong interest in providing an enjoyable and rewarding learning experience, this teacher builds a strong relationship of trust with students and motivates them to achieve outstanding results. It works hard to provide a supportive and stimulating environment that contributes to maximizing the use of classes and ensuring the success of students in their academic and scientific careers. Experienced over 5 years, I give private lessons in Mathematics - Analysis - Matrices - Statistics - Algebra - Geometry - Physics, either at home or by internet online by a method of virtual class following a link that serves as a table plus Skype (a very modern and effective method) with results all mentioned since 2015 by this method or by the face-to-face method since 2002. For more information, do not hesitate to contact me, guaranteed response in a few minutes up to 5-8 hours maximum.

Youssef
Support courses in engineering sciences (Automation, Electronics, RDM, renewable energy, electrical engineering
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer for students of preparatory classes and technical high school support courses in the subjects of engineering sciences (Electronics, automatic, electrical engineering, automation, programming). Digital electronics Analog electronic electromagnetism Automatic electrical engineering (transformers, electrical machines, switching power supply) C / c ++ programming, Assembler, ARM, STM32 renewable energy (wind, PV) engineering Sciences RDM Python PIC microcontroller Microprocessor These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams. COURSE OBJECTIVES AND PEDAGOGICAL APPROACH Resumption and deepening of fundamental concepts through exercises with course reminders. Put the student in a situation of questioning and research. Respond to individual issues and questions Exercise training in order to achieve real mastery of the content. Learn to build theoretical reasoning from observable facts or hypotheses. Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background) This educational approach is effective since it has often led me to interesting results with my students. Associate professor provides support courses in electrical engineering

Neshat
Digital communication systems: Analysis and Design
Digital communication is vital in modern engineering, facilitating seamless data transfer across various applications. This course offers a concise yet comprehensive overview of digital communication fundamentals, tailored for electrical engineering enthusiasts. Participants will explore key concepts such as modulation techniques, channel coding, transmission, and reception. Spread spectrum communication and multiple access techniques will also be covered, providing a holistic understanding of digital communication systems. Key Topics Covered: Modulation Techniques Channel Coding and Error Correction Digital Transmission and Reception Spread Spectrum Communication Multiple Access Techniques This course equips participants with essential knowledge and skills to design, analyze, and optimize digital communication systems. Whether a student or a professional, enroll today to embark on a transformative journey into the world of digital communication.

Stéphane
Private Lessons and Homework Help in Electrical Circuits
Stéphane, Engineer in Electrical Engineering and Intelligent Systems and PhD candidate. Support courses and homework help in: electrical circuits -MATLAB for Electrical Engineering I have had the chance to teach for more than 2 years now. Patience and Adaptability for a satisfactory result. This is my motto, because to teach you need a lot of patience because to ensure the progress of a student, you need time and a lot of pedagogy. Because you have to understand that the profiles are different and therefore it is always important to adapt well to the student you are supervising for better support.

Ansh
Basic electrical engineering with the all fundamentals
If you want to learn basics of electronic, this is the place where you will get all needs , less time and would like to know what to read and clear the exam then you should come with proper guided training or class in short term to enhance skillss

Nassim
Basic electronics course starting from zero
Detailed explanation of basic electronics courses starting from basic elements to the most complicated structures, solid course with detailed explanation All electronic components Basic logic circuits integrated circuits

Lionel
Understanding electricity through mathematical concepts and different diagrams
- Understand the concepts of direct and alternating electricity - Master mathematical concepts through different calculations, symbols and units - Understand the concepts of wiring switches and residential installations